Very high chemical resistance, low absorption of water and swelling, also performs very good lubrication feature;

the bronze backing provides the improved corrosion resistance comparing with FRB-50.

Lower wear, lower susceptibility to edge loading, no absorption of water and therefore no swelling;

Good damping behaviours, good resistance to shock loads.

The standard sizes of FRB-092 incorporate holes, which are dispersed in a special way over the whole bearing surface.These indents serve as lubricant reservoirs to rapidly build up a lubrication film at the start of movement and thereafter reduce the running friction.

The material is suitable for construction and agricultural machinery applications.

Suitable for heavy low speed of rotation and oscillating motion;Excellent carrying capacity, low friction coefficient and low wear rate;Non-absorbent and oil absorption, dimensional stability;

After the press-fit bearings can be re-processed to better tolerance; May be suitable for -150 ℃ ~ +250 ℃ temperature range.

It is widely used in automotive applications such as compressors, steering gear, power steering, pedal bearings;

king-pin bushes, tailgate pivots, mechanical handling and lifting equipment, hydraulic motors, agricultural machinery etc.

.FRB can offer different types of bronze alloys according to the required life time, service etc.

The tolerance is much tighter than wrapped bronze bushes.

The bearing shows excellent performance without pre-lubrication under conditions of extreme high/low temperature with low speed.

This material provides a maintenance-free bearing solution, particularly for high load, intermittent of oscillating motion.

Sphere valve, butterfly valve , pumps, chemical industry in the conditions of heavy load,

Low velocity but unable oiling conditions.