Professional manufacturer of self-lubricating bearings

FANRONG will be dedicated to providing customers with high-quality self-lubricating products. We are willing to customers a series of bearing a problem, welcome to come to the consultation, negotiate!

Professional manufacturer of self-lubricating bearings

FANRONG will be dedicated to providing customers with high-quality self-lubricating products. We are willing to customers a series of bearing a problem, welcome to come to the consultation, negotiate!

Professional manufacturer of self-lubricating bearings

FANRONG will be dedicated to providing customers with high-quality self-lubricating products. We are willing to customers a series of bearing a problem, welcome to come to the consultation, negotiate!

Professional manufacturer of self-lubricating bearings

FANRONG will be dedicated to providing customers with high-quality self-lubricating products. We are willing to customers a series of bearing a problem, welcome to come to the consultation, negotiate!

FANRONG COMPOSITE BEARING
INTRODUCTION

JIASHAN FANRONG BEARING FACTORY is specialied in studying, exploring and making oilless bearings. The products mainly include FRB-50 PTFE Steel bronze powder with PTFE, FRB-20 POM Steel Bronze Powder with POM Marginal Bearings, FRB-800 Bimetal Wrapped Bearings, FRB-FZ Ball Retainer Bearings...

MORE>

FANRONG Product

"Suitable for dry running, low coefficient of friction, lower wear, good sliding characteristics"

The transfer film created can protect the mating metal surface, suitable for rotary and oscillating movement;

Very high chemical resistance, low absorption of water and swelling, also performs very good lubrication feature;

the bronze backing provides the improved corrosion resistance comparing with FRB-50.

"Suitable for rotating and oscillating movement"

Less maintenance requirements due to the long re-lubrication intervals;

Lower wear, lower susceptibility to edge loading, no absorption of water and therefore no swelling;

Good damping behaviours, good resistance to shock loads.

"The bearings are wrapped from a cold formed homogenous bronze (CuSn8) with exceptional material properties."

The standard sizes of FRB-090 are fitted with diamond shaped lubrication indents in the bearing surface;

The standard sizes of FRB-092 incorporate holes, which are dispersed in a special way over the whole bearing surface.These indents serve as lubricant reservoirs to rapidly build up a lubrication film at the start of movement and thereafter reduce the running friction.

The material is suitable for construction and agricultural machinery applications.

"Under boundary lubrication for long-term use without maintenance"

Recommended initial grease lubrication, the bearing surface of the oil hole can guarantee the best fat distribution, and refueling can greatly improve the process of product life;

Suitable for heavy low speed of rotation and oscillating motion;Excellent carrying capacity, low friction coefficient and low wear rate;Non-absorbent and oil absorption, dimensional stability;

After the press-fit bearings can be re-processed to better tolerance; May be suitable for -150 ℃ ~ +250 ℃ temperature range.

"Steel shell backed with a lead bronze lining bearing material for oil lubricated applications."

This material has high load capacity and good fatigue properties;

It is widely used in automotive applications such as compressors, steering gear, power steering, pedal bearings;

king-pin bushes, tailgate pivots, mechanical handling and lifting equipment, hydraulic motors, agricultural machinery etc.

"Machined cast bronze bearings offer technically and economically favorable bearings solutions."

It is with high load capability, low weight and good corrosion resistance;

.FRB can offer different types of bronze alloys according to the required life time, service etc.

The tolerance is much tighter than wrapped bronze bushes.

"FRB-650 material is made of strong cast bronze based metal with special solid lubricants embedded."

The base metal withstands high load and the solid lubricants provide self-lubrication.

The bearing shows excellent performance without pre-lubrication under conditions of extreme high/low temperature with low speed.

This material provides a maintenance-free bearing solution, particularly for high load, intermittent of oscillating motion.

"TEX is based on steel backing as its structure, the surface is laid with PTFE fabric."

It performs well with heavy load and long lifetime.It is widely applies to agriculture machinery,

Sphere valve, butterfly valve , pumps, chemical industry in the conditions of heavy load,

Low velocity but unable oiling conditions.

Product application

More>

Class rolling
Bearing installation

More>

Electronic catalog
Download

More>

FANRONG to all industries worldwide
Provide high-quality self-lubricating products

JIASHAN FANRONG BEARING FACTORY, founded in 1999, is located in Jinxiu road Jiaxing City in Zhejiang Jiashan County Industrial Park West, 68, a beautiful environment, convenient traffic, close to 320 National Road. Factory covers an area of over 7000 square meters.

More

浙ICP备16021980号 Home About us Products Size Applications Design Doenload Problem News Contact us

Please contact us at

JIASHAN FANRONG BEARING FACTORY
Add: No.68 Jinxiu Road, Chengxi Subarea, Jiashan Industrial Estate, Jiashan, Zhejiang, China
Post Code: 314100

Contact us

Tel: 0573-84062777 84062877 84062826
Fax: 0573-84062107 84062177
E-mail: fr@jsfrzc.com
Website: www.jsfrzc.com

Self-lubricating bearings manufacturer

Jiashan prosperity Composite Bearing Factory, founded in 1999, is located in No.68 Jinxiu Road, Chengxi Subarea, Jiashan Industrial Estate, Jiashan, Zhejiang, China.

Welcome at any time
Send me an email
Design: 朗动设计 landoodesign
Copyright © 2016 JIASHAN FANRONG BEARING FACTORY 浙ICP备16021980号